How to Connect Launch X431 V8 to Vehicles?

sales   July 11, 2017   Comments Off on How to Connect Launch X431 V8 to Vehicles?

Launch X431 V 8” Lenovo Tablet PC can replace X-431 V WiFi/Bluetooth and with 2 years free update on the official site. It communicates with your car by connecting DBSCAR with Bluetooth. it achieves X431 series full car model and full-system diagnose function. It integrates more application and service, such as creating maintenance data base and case library, providing instant maintenance information, establishing public and private maintenance
social circle etc.

launch-x431-v-8inch-pad-scanner

How to Connect Launch X431 V 8″ to Vehicles:

The method used to connect the diagnostic connector to a vehicle’s DLC depends on the vehicle’s configuration as follows:
1) A vehicle equipped with an OBD II management system supplies both communication and 12V power through a standardized DLC.
2) A vehicle not equipped with an OBD II management system supplies communication through a DLC connection, and in some cases supplies 12V power through the cigarette lighter receptacle or a connection to the vehicle battery.

Follow the steps mentioned below to connect OBD II vehicle:

1. Locate vehicle’s DLC socket.
2. Plug the diagnostic connector into the vehicle’s DLC socket (It is suggested to use the OBD II extension cable to connect the diagnostic connector and DLC socket.).

launch-x431-v-full-system-diagnostic-connection-1

3. Choose one of the two ways to obtain power from:
a) Power adapter: Connect one end of the included power adapter to DC IN port of X-431 V tablet, and the other end to AC outlet.
b) Internal battery pack

For non-OBDII vehicle, proceed as follows:

1. Locate vehicle’s DLC socket.
2. Select the corresponding non-16pin connector.
3. Plug the non-16pin end of the connector into the DLC socket, then connect the other end to the OBD I adapter, and then tighten the captive screws.
4. Connect the other end of the adapter to the included diagnostic connector.
5. To supply power to OBD I adapter from:
a) Cigarette Lighter: Connect one end of the cigarette lighter cable to vehicle’s cigarette lighter receptacle, and the other end to the power jack of OBD I adaptor

launch-x431-v-full-system-diagnostic-connection-2

b) Battery Clamps Cable: Connect one end of the battery clamps cable to vehicle’s battery, and the other end to the power jack of OBD I adapter

launch-x431-v-full-system-diagnostic-connection-3

More details, please check below

http://www.obdiishop.com/launch-x431-v-full-system-diagnostic-tool.html

www.obdiishop.com
Skype: auobd2.com
Email: Sales@OBDIIshop.com
WhatsAPP: +86-13429866263 (Stacy)